DC3.7-5V Bluetooth 5.0 Audio Receiver Module Wireless Stereo MP3 Lossless Decoder Board DIY Speaker Sound Amplifier TYPE-C
£0.66
HC-08 Master-Slave Bluetooth Module Low Power Wireless Serial Transceiver
HC-08 Master-Slave Bluetooth Module Low Power Wireless Serial Transceiver
Price :
£0.90 £1.05价格范围：£0.90 至 £1.05
- Information related to taxation
- Some question to contact us
- Shipping Information
HC-08 Master-Slave BLE Bluetooth Serial Module, 80m long-distance wireless UART pass-through, low power 3.3V TTL, compatible with Arduino MCU, supports mobile Bluetooth transparent transmission for IoT DIY projects.
Description
Product Overview
HC-08 is a dual master-slave integrated BLE Bluetooth serial transparent transmission module, equipped with built-in PCB antenna, supporting 2.4GHz frequency band and up to 80-meter open-space communication distance. It adopts standard 3.3V TTL UART interface, compatible with 3.2~6V wide voltage power supply, works directly with 5V microcontrollers without level conversion. It supports master-slave mutual pairing, realizes full-duplex wireless serial data transmission, widely used in Arduino embedded development, smart devices, wireless data collection and electronic DIY projects.
Core Product Features
✅ Master-Slave Dual Mode Interchangeable
One module can be set as master, the other as slave for automatic pairing, no complex configuration required, realize point-to-point wireless serial communication.
✅ Long Distance & Stable Transmission
Built-in high-gain PCB antenna, 4dBm transmit power, receiving sensitivity up to -85dBm@2Mbps, maximum 80 meters barrier-free communication range.
✅ 3.3V TTL Wide Voltage Compatibility
3.0~3.6V core working voltage, baseboard supports 3.2~6V wide input, built-in reverse polarity protection circuit, directly connect to 5V MCU without level shifter.
✅ Low Power Consumption Design
Low quiescent current, suitable for battery-powered portable IoT equipment, stable operation under long-term power supply.
✅ Dual Form Factor Optional
- Bare SMD module: 27×13mm, ultra-small size for embedded integration, 26 gold-plated pads for secondary development.
- Baseboard version: 37.5×15.5mm with 6 pin headers (EN/VCC/GND/RXD/TXD/STATE), plug-and-play with MCU serial port. ✅ Intuitive Status Indicator LED Different flashing modes distinguish pairing status: slow flash = waiting for pairing, steady on = connected, easy to judge working state at a glance. ✅ Full-Duplex Transparent Transmission No complex Bluetooth protocol development needed after pairing, equivalent to wireless serial cable, default baud rate 9600, supports adjustable parity bit.
Full Technical Specifications
| Parameter | Details |
|---|---|
| Model | HC-08 BLE Bluetooth Module |
| Working Frequency | 2.4GHz |
| Air Data Rate | 2Mbps |
| Antenna | Onboard PCB Antenna, 4dBm transmit power |
| Communication Interface | UART 3.3V TTL Level |
| Core Operating Voltage | 3.0~3.6V |
| Baseboard Input Voltage | 3.2~6V (reverse polarity protection) |
| Receiving Sensitivity | -85dBm@2Mbps |
| Max Open Communication Distance | 80 Meters |
| Serial Format | 8 data bits, 1 stop bit, adjustable parity bit |
| Default Baud Rate | 9600 |
| Operating Temp | 25℃ ~ 75℃ |
| Storage Temp | -40℃ ~ 80℃ |
| Operating Humidity | 10% ~ 90% Non-condensing |
| Bare Module Size | 27mm × 13mm, Weight 0.9g |
| Baseboard Module Size | 37.5mm × 15.5mm, Weight 3.4g |
Pin Definition & Wiring Guide
Baseboard 6 Pin Definition
- VCC: Power supply pin, 3.2~6V input
- GND: Common ground of module and MCU
- TXD: Module serial output (connect to MCU RXD)
- RXD: Module serial input (connect to MCU TXD, cross wiring required)
- STATE: Connection status pin, low level = unpaired, high level = connected
- EN (KEY): Clear pairing memory pin, short to GND to erase paired device info
Wiring Tip
Cross connect TX/RX between module and microcontroller: Module TXD ↔ MCU RXD; Module RXD ↔ MCU TXD, otherwise data cannot be transmitted normally.
Working Status LED Description
- Unpaired (no device recorded): LED flashes once per second (100ms bright, 900ms off)
- Unpaired (slave address stored): LED flashes once per second (900ms bright, 100ms off)
- Slave module waiting for pairing: LED lights 1s every 2s
- Successfully paired & connected: LED keeps steady on
Application Scenarios
- Embedded MCU wireless communication: Arduino, STM32, ESP32 serial data wireless transmission
- Smart home equipment: Wireless sensor data upload, remote switch control
- Electronic DIY: Bluetooth robot car, wireless data acquisition, handheld measuring instruments
- Portable devices: Battery-powered wireless monitoring equipment, Bluetooth serial debugging tools
Warm Reminder
- This is BLE low-power Bluetooth module, cannot directly connect to PC built-in Bluetooth; need to use BLE serial test APP on Android 4.3+/iPhone 4s and above.
- Do not exceed 6V input voltage to avoid burning the module; strictly follow cross TX/RX wiring rules.
- Product parameters and appearance may be updated without prior notice, please refer to the actual received module.
Downloads
PDF File
HC-08 Master-Slave Bluetooth Module Low Power Wireless Serial Transceiver
Price :
£0.90 £1.05价格范围：£0.90 至 £1.05
- Information related to taxation
- Some question to contact us
- Shipping Information
HC-08 Master-Slave BLE Bluetooth Serial Module, 80m long-distance wireless UART pass-through, low power 3.3V TTL, compatible with Arduino MCU, supports mobile Bluetooth transparent transmission for IoT DIY projects.
Description
Product Overview
HC-08 is a dual master-slave integrated BLE Bluetooth serial transparent transmission module, equipped with built-in PCB antenna, supporting 2.4GHz frequency band and up to 80-meter open-space communication distance. It adopts standard 3.3V TTL UART interface, compatible with 3.2~6V wide voltage power supply, works directly with 5V microcontrollers without level conversion. It supports master-slave mutual pairing, realizes full-duplex wireless serial data transmission, widely used in Arduino embedded development, smart devices, wireless data collection and electronic DIY projects.
Core Product Features
✅ Master-Slave Dual Mode Interchangeable
One module can be set as master, the other as slave for automatic pairing, no complex configuration required, realize point-to-point wireless serial communication.
✅ Long Distance & Stable Transmission
Built-in high-gain PCB antenna, 4dBm transmit power, receiving sensitivity up to -85dBm@2Mbps, maximum 80 meters barrier-free communication range.
✅ 3.3V TTL Wide Voltage Compatibility
3.0~3.6V core working voltage, baseboard supports 3.2~6V wide input, built-in reverse polarity protection circuit, directly connect to 5V MCU without level shifter.
✅ Low Power Consumption Design
Low quiescent current, suitable for battery-powered portable IoT equipment, stable operation under long-term power supply.
✅ Dual Form Factor Optional
- Bare SMD module: 27×13mm, ultra-small size for embedded integration, 26 gold-plated pads for secondary development.
- Baseboard version: 37.5×15.5mm with 6 pin headers (EN/VCC/GND/RXD/TXD/STATE), plug-and-play with MCU serial port. ✅ Intuitive Status Indicator LED Different flashing modes distinguish pairing status: slow flash = waiting for pairing, steady on = connected, easy to judge working state at a glance. ✅ Full-Duplex Transparent Transmission No complex Bluetooth protocol development needed after pairing, equivalent to wireless serial cable, default baud rate 9600, supports adjustable parity bit.
Full Technical Specifications
| Parameter | Details |
|---|---|
| Model | HC-08 BLE Bluetooth Module |
| Working Frequency | 2.4GHz |
| Air Data Rate | 2Mbps |
| Antenna | Onboard PCB Antenna, 4dBm transmit power |
| Communication Interface | UART 3.3V TTL Level |
| Core Operating Voltage | 3.0~3.6V |
| Baseboard Input Voltage | 3.2~6V (reverse polarity protection) |
| Receiving Sensitivity | -85dBm@2Mbps |
| Max Open Communication Distance | 80 Meters |
| Serial Format | 8 data bits, 1 stop bit, adjustable parity bit |
| Default Baud Rate | 9600 |
| Operating Temp | 25℃ ~ 75℃ |
| Storage Temp | -40℃ ~ 80℃ |
| Operating Humidity | 10% ~ 90% Non-condensing |
| Bare Module Size | 27mm × 13mm, Weight 0.9g |
| Baseboard Module Size | 37.5mm × 15.5mm, Weight 3.4g |
Pin Definition & Wiring Guide
Baseboard 6 Pin Definition
- VCC: Power supply pin, 3.2~6V input
- GND: Common ground of module and MCU
- TXD: Module serial output (connect to MCU RXD)
- RXD: Module serial input (connect to MCU TXD, cross wiring required)
- STATE: Connection status pin, low level = unpaired, high level = connected
- EN (KEY): Clear pairing memory pin, short to GND to erase paired device info
Wiring Tip
Cross connect TX/RX between module and microcontroller: Module TXD ↔ MCU RXD; Module RXD ↔ MCU TXD, otherwise data cannot be transmitted normally.
Working Status LED Description
- Unpaired (no device recorded): LED flashes once per second (100ms bright, 900ms off)
- Unpaired (slave address stored): LED flashes once per second (900ms bright, 100ms off)
- Slave module waiting for pairing: LED lights 1s every 2s
- Successfully paired & connected: LED keeps steady on
Application Scenarios
- Embedded MCU wireless communication: Arduino, STM32, ESP32 serial data wireless transmission
- Smart home equipment: Wireless sensor data upload, remote switch control
- Electronic DIY: Bluetooth robot car, wireless data acquisition, handheld measuring instruments
- Portable devices: Battery-powered wireless monitoring equipment, Bluetooth serial debugging tools
Warm Reminder
- This is BLE low-power Bluetooth module, cannot directly connect to PC built-in Bluetooth; need to use BLE serial test APP on Android 4.3+/iPhone 4s and above.
- Do not exceed 6V input voltage to avoid burning the module; strictly follow cross TX/RX wiring rules.
- Product parameters and appearance may be updated without prior notice, please refer to the actual received module.
Downloads
PDF File
Related Products
↓ 19%
-
促销中
SSM2167 Microphone Preamp Module Voice Compressor Audio Preamplifier Board 3‑5V
原价为：£1.66。£1.46当前价格为：£1.46。 -
促销中
HR911105A RJ45 Network Connector With Integrated Network Transformer Metal Shielded Ethernet Socket
原价为：£0.38。£0.21当前价格为：£0.21。 -
促销中
Raspberry Pi GPIO Expansion Kit T‑type U‑type I‑type Breakout Board 40Pin Ribbon Cable 400‑Points Breadboard
£0.31 £0.57价格范围：£0.31 至 £0.57 -
促销中
CH341A USB to Parallel Port Converter Module 3.3V‑5V Signal Level Adapter With Indicator Light
原价为：£1.13。£1.04当前价格为：£1.04。 -
促销中
0.96/1.3/1.44/1.8 Inch ST7735 SPI TFT LCD Display Module with 4 Independent Buttons, 3.3V Color Screen for Arduino DIY Project
£0.91 £1.29价格范围：£0.91 至 £1.29 -
促销中
10A 20A 30A Bidirectional Brushed ESC 4.8‑8.4V RC Brushed Motor Speed Controller With Brake Switch
原价为：£1.36。£1.15当前价格为：£1.15。 -
促销中
Type‑C Lithium Battery Charging Boost Power Module 6V Output 0.5A For 4 AA Battery Replace Solution
原价为：£0.45。£0.33当前价格为：£0.33。 -
促销中
AC Digital Power Meter 110‑250V 100A LCD Energy Voltage Current Power Monitor With Current Transformer
原价为：£3.77。£3.37当前价格为：£3.37。 -
促销中
500W High‑Power DC‑DC Step‑Down Module 12‑95V to Adjustable Voltage Constant Current Power Supply Board
原价为：£3.77。£3.68当前价格为：£3.68。 -
促销中
KY-019 5V 1 Channel Relay Module Board Shield For Arduino PIC AVR DSP ARM
原价为：£0.38。£0.21当前价格为：£0.21。 -
促销中
Mini560 DC-DC Step Down Converter Module 3.3V 5V 9V 12V 5A Fixed Output Buck Voltage Regulator Power Supply Module
£0.25 £0.41价格范围：£0.25 至 £0.41 -
促销中
XH‑A305 Digital Amplifier Board 2.1 Channel Subwoofer Audio Power Amplifier Module
原价为：£11.32。£8.30当前价格为：£8.30。 -
CR2032 LIR2032 Button Battery Holder With ON OFF Switch Lead Wire
£0.06 -
STM32 F051C8T6 Core Board STM32F051 Minimum System Development Board
£2.35 -
Infrared Ranging Sensor Module Obstacle Avoidance Distance Detection Sensor
£11.18 -
TPA3116D2 Digital Audio Amplifier Board Dual Channel Power Amplifier Module
£1.39 £1.72价格范围：£1.39 至 £1.72
