SN65HVD230 CAN Bus Transceiver Module 3.3V 1Mbps CAN Communication Board For MCU
SN65HVD230 CAN Bus Transceiver Module 3.3V 1Mbps CAN Communication Board For MCU
Price :
$0.38
- Information related to taxation
- Some question to contact us
- Shipping Information
This SN65HVD230 CAN transceiver module works at 3.3V, supports up to 1Mbps communication rate, fully compliant with ISO11898 standard. Built-in multiple protection circuits, widely used in industrial automation, automobile, robot CAN bus communication projects.
Description
✅ Product Introduction
The SN65HVD230 controller is a network (CAN) transceiver, specifically designed to be used with the Texas Instruments TMS320Lx240xTM 3.3-V DSP (with CAN controller) or with equivalent devices. Each CAN transceiver is designed to provide differential transmit capability to the bus and differential receive capability to the CAN controller, with a maximum transmission speed of up to 1 Mbps. The device is designed to operate in extremely harsh environments and features cross-line protection, ground fault and overvoltage protection, overtemperature protection, and a wide common-mode range.
📋 Product Specifications
| Parameter | Details |
|---|---|
| Supply voltage | 3.3V |
| Standard | Fully compatible with ISO11898 standard |
| Input impedance | High input impedance, supports up to 120 nodes |
| Standby current | Typical 370 μA, low power standby mode |
| Max transmission rate | 1Mb/s |
| Protection | Thermal protection, open-circuit fault protection |
| Anti-interference | Transient interference resistance, slope control reduces RFI; differential receiver resists common-mode & EMI interference |
📌 Pin Description
- 3V3: Connect to the positive terminal of the 3.3V power supply
- GND: Connect to the negative terminal of the power supply
- CTX: CAN controller data transmission input
- CRX: CAN bus data reception output
- CANH: CAN bus high (high-level CAN voltage input/output)
- CANL: CAN bus low (low-level CAN voltage input/output)
🔧 Work mode and control logic
The SN65HVD230 has three different operating modes: high-speed, slope, and standby. Its operating mode can be controlled through the Rs control pin.
The Tx output pin of the CAN controller connects to the data input pin D of the SN65HVD230 to send node data to CAN network; the Rx receiving pin of the CAN controller connects to the data output pin R of the SN65HVD230 for data receiving.
The mode selection port Rs connects via a jumper and a slope resistor (0~100kΩ potentiometer) with one end grounded, enabling hardware selection of three working modes.
🌐 Application
- Motor control
- Industrial automation
- Base station control and status monitoring
- Robotics
- Automotive industry
- UPS control
📏 Size & Weight
Dimension: 14mm × 16mm
Weight: 2.9g
Kind reminder: If there are version differences or images not been updated, please refer to the actual product.
Downloads
PDF File
SN65HVD230 CAN Bus Transceiver Module 3.3V 1Mbps CAN Communication Board For MCU
Price :
$0.38
- Information related to taxation
- Some question to contact us
- Shipping Information
This SN65HVD230 CAN transceiver module works at 3.3V, supports up to 1Mbps communication rate, fully compliant with ISO11898 standard. Built-in multiple protection circuits, widely used in industrial automation, automobile, robot CAN bus communication projects.
Description
✅ Product Introduction
The SN65HVD230 controller is a network (CAN) transceiver, specifically designed to be used with the Texas Instruments TMS320Lx240xTM 3.3-V DSP (with CAN controller) or with equivalent devices. Each CAN transceiver is designed to provide differential transmit capability to the bus and differential receive capability to the CAN controller, with a maximum transmission speed of up to 1 Mbps. The device is designed to operate in extremely harsh environments and features cross-line protection, ground fault and overvoltage protection, overtemperature protection, and a wide common-mode range.
📋 Product Specifications
| Parameter | Details |
|---|---|
| Supply voltage | 3.3V |
| Standard | Fully compatible with ISO11898 standard |
| Input impedance | High input impedance, supports up to 120 nodes |
| Standby current | Typical 370 μA, low power standby mode |
| Max transmission rate | 1Mb/s |
| Protection | Thermal protection, open-circuit fault protection |
| Anti-interference | Transient interference resistance, slope control reduces RFI; differential receiver resists common-mode & EMI interference |
📌 Pin Description
- 3V3: Connect to the positive terminal of the 3.3V power supply
- GND: Connect to the negative terminal of the power supply
- CTX: CAN controller data transmission input
- CRX: CAN bus data reception output
- CANH: CAN bus high (high-level CAN voltage input/output)
- CANL: CAN bus low (low-level CAN voltage input/output)
🔧 Work mode and control logic
The SN65HVD230 has three different operating modes: high-speed, slope, and standby. Its operating mode can be controlled through the Rs control pin.
The Tx output pin of the CAN controller connects to the data input pin D of the SN65HVD230 to send node data to CAN network; the Rx receiving pin of the CAN controller connects to the data output pin R of the SN65HVD230 for data receiving.
The mode selection port Rs connects via a jumper and a slope resistor (0~100kΩ potentiometer) with one end grounded, enabling hardware selection of three working modes.
🌐 Application
- Motor control
- Industrial automation
- Base station control and status monitoring
- Robotics
- Automotive industry
- UPS control
📏 Size & Weight
Dimension: 14mm × 16mm
Weight: 2.9g
Kind reminder: If there are version differences or images not been updated, please refer to the actual product.
Downloads
PDF File
Related Products
Products not found
-
CR2032 LIR2032 Button Battery Holder With ON OFF Switch Lead Wire
$0.08 加入购物车 -
STM32 F051C8T6 Core Board STM32F051 Minimum System Development Board
$3.12 加入购物车 -
Infrared Ranging Sensor Module Obstacle Avoidance Distance Detection Sensor
$14.82 加入购物车 -
TPA3116D2 Digital Audio Amplifier Board Dual Channel Power Amplifier Module
$1.84 $2.28价格范围：$1.84 至 $2.28 选择选项 本产品有多种变体。 可在产品页面上选择这些选项 -
1.54 Inch TFT LCD Display Module ST7789 Driver SPI Interface 240×240 Resolution Screen
$1.68 $1.69价格范围：$1.68 至 $1.69 选择选项 本产品有多种变体。 可在产品页面上选择这些选项 -
促销中
LED Chasing Light Game DIY Kit Electronic Soldering Training Kit 8×8 LED Matrix Flow Light Production Kit
$1.52 $1.55价格范围：$1.52 至 $1.55 选择选项 本产品有多种变体。 可在产品页面上选择这些选项 -
ZK-3002B TPA3255 Bluetooth 5.3 Audio Amplifier Board 300W×2 Dual Channel Digital Power Amp Module
$16.32 加入购物车 -
ESP32-C3 SuperMini Development Board WiFi Bluetooth 5.0 Type-C USB RISC-V IoT Module
$1.50 加入购物车 -
促销中
ZK-1602 High Power Digital amplifier board TDA7498E Stereo 160WX2 Bridged Mono 220W Amplifier Module
原价为：$14.50。$12.50当前价格为：$12.50。 加入购物车 -
促销中
ZK-PR01 HIFI Front Tone Board Stereo Subwoofer Operational Amplifier JRC2068 AMP Audio Music
原价为：$12.00。$11.50当前价格为：$11.50。 加入购物车 -
FNIRSI SFD-02 4-IN-1 Indoor Air Quality Monitor Touchscreen Formaldehyde Detector HCHO TVOC Temperature Test Air Detector
$31.50 加入购物车 -
Digital Thermostat Socket Intelligent Temperature Controller Timer Switch With NTC Sensor
$6.24 $6.80价格范围：$6.24 至 $6.80 选择选项 本产品有多种变体。 可在产品页面上选择这些选项 -
FNIRSI HS-02 DC 24V 100W Welding Station, 100-450°C Adjustable Temperature Electric Soldering Iron with PD Support
$26.71 $68.64价格范围：$26.71 至 $68.64 选择选项 本产品有多种变体。 可在产品页面上选择这些选项 -
FNIRSI GC-02 Geiger Counter Nuclear Radiation Detector Personal Dosimeter X-ray Y-ray Radioactivity Tester Marble Detector
$28.80 加入购物车 -
促销中
DC 8-26V Fever Karaoke Reverb Board Microphone Karaoke Singing Front Effector Board DSP Mixing Anti Howling AMP
原价为：$11.50。$11.00当前价格为：$11.00。 加入购物车 -
FNIRSI FDM01 Digital Handheld DB Meter 30~130dB 0.5dB Resolution A-Weighting Noise Measuring Instrument Audio Sound Level Meter
$16.00 加入购物车
