SHT85 Digital Temperature and Humidity Sensor I2C High Precision Humidity Detection Module
原价为：€17.66。€15.23当前价格为：€15.23。
↓ 14%
MCP9600 Thermocouple Converter Module K-Type I2C Temperature Sensor Breakout Board
MCP9600 Thermocouple Converter Module K-Type I2C Temperature Sensor Breakout Board
Price :
原价为：€26.49。€20.21当前价格为：€20.21。
- Information related to taxation
- Some question to contact us
- Shipping Information
MCP9600 Thermocouple Converter Module I2C K Type Temperature Sensor Board
Description
★ Product Features
● Thermocouple EMF to °C converter with integrated cold junction compensation
● Supports 8 thermocouple types defined by NIST ITS-90: Type K
● Maximum hot junction accuracy: ±1.5°C
● Typical measurement resolution: 0.0625°C for cold junction & hot junction
● Four programmable temperature alarm outputs
▸ Monitor hot junction or cold junction temperature
▸ Detect temperature rise or fall
▸ Programmable hysteresis up to 255°C
● Built-in programmable digital temperature filter
● Low power consumption design
▸ Support shutdown mode
▸ Burst mode: 1 ~ 128 temperature sampling
● 2-wire I2C compatible interface, 100kHz; up to 8 modules on one I2C bus
| Parameter | Specification |
|---|---|
| Operating Voltage | 2.7V ~ 5.5V |
| Typical Operating Current | 300 μA |
| Typical Shutdown Current | 2 μA |
| Chip Package | 20-lead MQFN |
📌 Product Description
The MCP9600 is developed by Microchip Technology Inc. It converts thermocouple electromotive force (EMF) into Celsius temperature values with integrated cold-junction compensation.
The chip can correct nonlinear errors of eight kinds of thermocouples, and provides accurate temperature reading with ±1.5°C accuracy for selected thermocouple. Its calibration coefficients are derived from the official NIST ITS-90 thermocouple database.
The MCP9600 digital temperature sensor has user programmable registers, bringing flexible design for various temperature measurement projects. Users can configure low-power mode for battery-operated devices, adjustable digital filter for fast-changing temperature, and four independent programmable temperature alarm outputs to monitor multiple temperature zones.
Multiple configurations are available for temperature alarm limits, including alarm polarity (active low / active high push-pull output). It can work in comparator mode for thermostat control or interrupt mode for microprocessor system. The alarms support rising/falling temperature detection with hysteresis up to ±225°C.
It adopts standard 2-wire I2C serial interface. The ADDR pin configures device address, allowing up to eight modules to be connected on a single I2C bus.
▶ Typical Application
● Petrochemical thermal management
● Handheld measuring instruments
● Industrial equipment temperature monitoring
● Industrial oven temperature control
● Industrial engine temperature detection
● Temperature acquisition test rack
⚠️ Kind Reminder
If there are version differences or images not updated, please refer to the actual delivered product.
Downloads
PDF File
MCP9600 Thermocouple Converter Module K-Type I2C Temperature Sensor Breakout Board
Price :
原价为：€26.49。€20.21当前价格为：€20.21。
- Information related to taxation
- Some question to contact us
- Shipping Information
MCP9600 Thermocouple Converter Module I2C K Type Temperature Sensor Board
Description
★ Product Features
● Thermocouple EMF to °C converter with integrated cold junction compensation
● Supports 8 thermocouple types defined by NIST ITS-90: Type K
● Maximum hot junction accuracy: ±1.5°C
● Typical measurement resolution: 0.0625°C for cold junction & hot junction
● Four programmable temperature alarm outputs
▸ Monitor hot junction or cold junction temperature
▸ Detect temperature rise or fall
▸ Programmable hysteresis up to 255°C
● Built-in programmable digital temperature filter
● Low power consumption design
▸ Support shutdown mode
▸ Burst mode: 1 ~ 128 temperature sampling
● 2-wire I2C compatible interface, 100kHz; up to 8 modules on one I2C bus
| Parameter | Specification |
|---|---|
| Operating Voltage | 2.7V ~ 5.5V |
| Typical Operating Current | 300 μA |
| Typical Shutdown Current | 2 μA |
| Chip Package | 20-lead MQFN |
📌 Product Description
The MCP9600 is developed by Microchip Technology Inc. It converts thermocouple electromotive force (EMF) into Celsius temperature values with integrated cold-junction compensation.
The chip can correct nonlinear errors of eight kinds of thermocouples, and provides accurate temperature reading with ±1.5°C accuracy for selected thermocouple. Its calibration coefficients are derived from the official NIST ITS-90 thermocouple database.
The MCP9600 digital temperature sensor has user programmable registers, bringing flexible design for various temperature measurement projects. Users can configure low-power mode for battery-operated devices, adjustable digital filter for fast-changing temperature, and four independent programmable temperature alarm outputs to monitor multiple temperature zones.
Multiple configurations are available for temperature alarm limits, including alarm polarity (active low / active high push-pull output). It can work in comparator mode for thermostat control or interrupt mode for microprocessor system. The alarms support rising/falling temperature detection with hysteresis up to ±225°C.
It adopts standard 2-wire I2C serial interface. The ADDR pin configures device address, allowing up to eight modules to be connected on a single I2C bus.
▶ Typical Application
● Petrochemical thermal management
● Handheld measuring instruments
● Industrial equipment temperature monitoring
● Industrial oven temperature control
● Industrial engine temperature detection
● Temperature acquisition test rack
⚠️ Kind Reminder
If there are version differences or images not updated, please refer to the actual delivered product.
Downloads
PDF File
Related Products
-
ESP32-C3 SuperMini Development Board WiFi Bluetooth 5.0 Type-C USB RISC-V IoT Module
€1.32 -
促销中
ZK-1602 High Power Digital amplifier board TDA7498E Stereo 160WX2 Bridged Mono 220W Amplifier Module
原价为：€12.80。€11.04当前价格为：€11.04。 -
促销中
ZK-PR01 HIFI Front Tone Board Stereo Subwoofer Operational Amplifier JRC2068 AMP Audio Music
原价为：€10.60。€10.16当前价格为：€10.16。 -
FNIRSI SFD-02 4-IN-1 Indoor Air Quality Monitor Touchscreen Formaldehyde Detector HCHO TVOC Temperature Test Air Detector
€27.82 -
Digital Thermostat Socket Intelligent Temperature Controller Timer Switch With NTC Sensor
€5.51 €6.01价格范围：€5.51 至 €6.01 -
FNIRSI HS-02 DC 24V 100W Welding Station, 100-450°C Adjustable Temperature Electric Soldering Iron with PD Support
€23.59 €60.62价格范围：€23.59 至 €60.62 -
FNIRSI GC-02 Geiger Counter Nuclear Radiation Detector Personal Dosimeter X-ray Y-ray Radioactivity Tester Marble Detector
€25.43 -
促销中
DC 8-26V Fever Karaoke Reverb Board Microphone Karaoke Singing Front Effector Board DSP Mixing Anti Howling AMP
原价为：€10.16。€9.71当前价格为：€9.71。 -
FNIRSI FDM01 Digital Handheld DB Meter 30~130dB 0.5dB Resolution A-Weighting Noise Measuring Instrument Audio Sound Level Meter
€14.13 -
FNIRSI HS-02B DC 24V 100W Welding Station, 100-450°C Adjustable Temperature Electric Soldering Iron with PD Support
€23.59 €53.21价格范围：€23.59 至 €53.21 -
FNIRSI ERD-10 4-IN-1 Magnetic Field Strength Temperature Monitor RF Power Electromagnetic Radiation Detector Electric 2.4″
€16.01 -
Bluetooth 4.0 MP3 Decoder Board FM Radio Module Support USB SD AUX With Remote Control
€5.19 -
FNIRSI WHD-02 Pin-Type Color Screen Meter for Wood, Temperature & Humidity Meter Firmware Upgrade and 7 Measurement Modes
€17.22 -
促销中
ZK-SMC02 Drive integrated 42 57 stepper motor forward and reverse control driver angle pulse speed PLC serial port communication
原价为：€13.25。€12.80当前价格为：€12.80。 -
FNIRSI FPM-02 Digital LED Lux Meter High Precision OEM Customizable Plastic Black for Instrument Luminometer Photometer
€17.65 -
FNIRSI GD-02 0.5s Sampling Time 1ppm/1%LEL High Accuracy Long Life CH4 C3H8 LPG Natural Gas Combustible Gas Leak Detector
€18.10
