TTGO ESP32 WiFi Bluetooth Development Board 1.14 Inch Color LCD Display Type-C Low Power Module With Pin Header And Power Cable For Arduino IoT DIY Electronic Project
Original price was: $11.00.$9.94Current price is: $9.94.
↓ 10%
PN532 NFC RFID V3 Module 13.56MHz I2C SPI UART Card Reader Writer With IC Card & Key Fob Tag For Arduino Raspberry Pi IoT Access Control Project
PN532 NFC RFID V3 Module 13.56MHz I2C SPI UART Card Reader Writer With IC Card & Key Fob Tag For Arduino Raspberry Pi IoT Access Control Project
Price :
$1.65 $3.36Price range: $1.65 through $3.36
- Information related to taxation
- Some question to contact us
- Shipping Information
PN532 NFC RFID V3 module based on NXP PN532 chip, supports I2C/SPI/HSU multi interface, read & write Mifare/FeliCa cards, communicate with NFC Android phone, Arduino compatible for access control and DIY project.
Description
PN532 NFC RFID V3 Module
📌 Product Overview PN532 NFC RFID V3 Module is a near field communication module based on NXP PN532 chip. NFC (Near Field Communication) enables wireless communication between devices when kept within a few centimeters. This module leads out nearly all IO pins of PN532, supports I2C, SPI and HSU high-speed UART interfaces with easy mode switching. It can read and write multiple types of RFID cards, realize peer-to-peer communication, and communicate with NFC-enabled Android smartphones. It is compatible with Arduino, plug-and-play, easy for secondary development, widely used in access control, card reading, DIY electronic projects and NFC verification systems. ✨ Core Features- Compact size, easy to embed into various electronic projects.
- Multi-interface support: I2C, SPI, HSU(High-Speed UART), quick switching between different communication modes.
- Support RFID read & write, peer-to-peer communication, NFC interaction with Android mobile phones.
- Compatible card types: Mifare 1K, 4K, Ultralight, DesFire, ISO14443-4 series cards, FeliCa cards, IRT5001 cards.
- Max reading distance up to 5-7 cm.
- Onboard level shifter, I2C & UART work with 5V TTL, SPI works with 3.3V TTL.
- Arduino compatible, plug and play design.
| Item | Specification |
|---|---|
| Main Chip | NXP PN532 |
| Communication Interface | I2C / SPI / HSU(High-Speed UART) |
| Card Reading Distance | 5-7cm max |
| Module Dimension | 43 X 40 mm |
| Module Net Weight | 5.8g |
| Working Temperature | -40℃ ~ +85℃ |
| Power Supply | 3.3V / 5V |
| Brand | LIZAO |
| Type | NFC RFID Module |
| Supported Cards | Mifare, FeliCa, ISO14443 series |
- Module size: 43 X 40 mm, Net weight:5.8g
- S50 white card: 81 X 54 mm
- This is a near-field module, effective sensing distance is within 5-7cm, keep card close to the antenna area.
- Select correct communication interface before use; avoid wrong wiring to burn the chip.
- Do not apply voltage higher than 5V to the module.
- Version upgrade may lead to slight PCB difference, please refer to the real object.
- RFID card reading & writing projects
- Access control and identity verification system
- NFC mobile phone interaction development
- Peer to peer wireless data transmission
- Arduino / MCU secondary development, electronic DIY
Downloads
PDF File
PN532 NFC RFID V3 Module 13.56MHz I2C SPI UART Card Reader Writer With IC Card & Key Fob Tag For Arduino Raspberry Pi IoT Access Control Project
Price :
$1.65 $3.36Price range: $1.65 through $3.36
- Information related to taxation
- Some question to contact us
- Shipping Information
PN532 NFC RFID V3 module based on NXP PN532 chip, supports I2C/SPI/HSU multi interface, read & write Mifare/FeliCa cards, communicate with NFC Android phone, Arduino compatible for access control and DIY project.
Description
PN532 NFC RFID V3 Module
📌 Product Overview PN532 NFC RFID V3 Module is a near field communication module based on NXP PN532 chip. NFC (Near Field Communication) enables wireless communication between devices when kept within a few centimeters. This module leads out nearly all IO pins of PN532, supports I2C, SPI and HSU high-speed UART interfaces with easy mode switching. It can read and write multiple types of RFID cards, realize peer-to-peer communication, and communicate with NFC-enabled Android smartphones. It is compatible with Arduino, plug-and-play, easy for secondary development, widely used in access control, card reading, DIY electronic projects and NFC verification systems. ✨ Core Features- Compact size, easy to embed into various electronic projects.
- Multi-interface support: I2C, SPI, HSU(High-Speed UART), quick switching between different communication modes.
- Support RFID read & write, peer-to-peer communication, NFC interaction with Android mobile phones.
- Compatible card types: Mifare 1K, 4K, Ultralight, DesFire, ISO14443-4 series cards, FeliCa cards, IRT5001 cards.
- Max reading distance up to 5-7 cm.
- Onboard level shifter, I2C & UART work with 5V TTL, SPI works with 3.3V TTL.
- Arduino compatible, plug and play design.
| Item | Specification |
|---|---|
| Main Chip | NXP PN532 |
| Communication Interface | I2C / SPI / HSU(High-Speed UART) |
| Card Reading Distance | 5-7cm max |
| Module Dimension | 43 X 40 mm |
| Module Net Weight | 5.8g |
| Working Temperature | -40℃ ~ +85℃ |
| Power Supply | 3.3V / 5V |
| Brand | LIZAO |
| Type | NFC RFID Module |
| Supported Cards | Mifare, FeliCa, ISO14443 series |
- Module size: 43 X 40 mm, Net weight:5.8g
- S50 white card: 81 X 54 mm
- This is a near-field module, effective sensing distance is within 5-7cm, keep card close to the antenna area.
- Select correct communication interface before use; avoid wrong wiring to burn the chip.
- Do not apply voltage higher than 5V to the module.
- Version upgrade may lead to slight PCB difference, please refer to the real object.
- RFID card reading & writing projects
- Access control and identity verification system
- NFC mobile phone interaction development
- Peer to peer wireless data transmission
- Arduino / MCU secondary development, electronic DIY
Downloads
PDF File
Related Products
↓ 17%
CC1101 433MHz Wireless RF Transceiver Module Low Power Serial Communication Board With Spring Antenna For Arduino Smart Home Project
Original price was: $1.20.$1.00Current price is: $1.00.
↓ 15%
JDY‑25M BLE5.0 Bluetooth Module 80m Long Transmission Distance 1.9‑3.6V Serial Port Wireless Communication Board For Arduino IoT Project
Original price was: $1.50.$1.28Current price is: $1.28.
↓ 13%
GY‑471 MAX471 Current Detection Sensor Module High Precision DC Current Measuring Module For Arduino Over‑current Protection DIY Electronic Project
Original price was: $1.60.$1.39Current price is: $1.39.
-
Powerful Suction Solder Sucker CS305 (Improved Version)
$0.86 -
WT32-ETH01 Serial to Ethernet Module (ESP32 Based)
$4.50 $9.63Price range: $4.50 through $9.63 -
Pro Mini MEGA328P 5V/16M Improved Version Microcontroller Board (Arduino Compatible)
$1.45 -
Sale!
LM2596S DC-DC Buck Power Supply Module 3-40V Input 1.5-35V Adjustable Output Step Down Converter With Power Indicator For Arduino Electronic Project
$0.32 $0.36Price range: $0.32 through $0.36 -
LIVE Scanner V3 1D 2D Barcode QR Code Scanning Module USB UART
$12.68 -
NiceMCU-C5 ESP32-C5 2.8 Inch IPS Display Development Board
$11.92 -
GY-49 MAX44009 Ambient Light Sensor Module I2C 3V-5V
$7.38 -
FT232RL MWC USB to TTL Serial Debugger Module 3.3V/5V
$1.02 -
Sale!
TTGO ESP32 WiFi Bluetooth Development Board 1.14 Inch Color LCD Display Type-C Low Power Module With Pin Header And Power Cable For Arduino IoT DIY Electronic Project
Original price was: $11.00.$9.94Current price is: $9.94. -
Sale!
28BYJ-48 5V Stepper Motor With ULN2003 Driver Module 4 Phase Reduction Step Motor Kit For Arduino Smart Home And Robot DIY Projects
$0.25 $0.77Price range: $0.25 through $0.77 -
Sale!
TMC5160TPro Stepper Motor Driver Module External Power MOSFET Ultra Silent Anti-Shake Driver For 3D Printer CNC Stepper Motor Control Project
$15.00 $16.50Price range: $15.00 through $16.50 -
Sale!
Nu-Link Downloader Emulator For N76E003 MCU Supports 3.3V/5V 2.54-5P Interface Program Download & Online Debugger With USB Cable
Original price was: $8.50.$7.92Current price is: $7.92. -
Sale!
FT232H High Speed Multifunction USB Communication Module USB To SPI/I2C/UART Serial Adapter Board For MCU Program Download And Data Transmission
$5.50 $6.97Price range: $5.50 through $6.97 -
Sale!
VEML6035 Ambient Light Sensor Module 16-bit High Sensitivity I2C Interface Brightness Detection Board For Arduino Raspberry Pi Light Intensity Measurement
Original price was: $2.00.$1.84Current price is: $1.84. -
Sale!
PN532 NFC RFID V3 Module 13.56MHz I2C SPI UART Card Reader Writer With IC Card & Key Fob Tag For Arduino Raspberry Pi IoT Access Control Project
$1.65 $3.36Price range: $1.65 through $3.36 -
Sale!
IP5356 Digital Display Fast Charging Power Bank Module 5V 3A Lithium Battery Charge Discharge Board Type-C Dual USB Power Management Module
Original price was: $1.50.$1.38Current price is: $1.38.
