Nu-Link Downloader Emulator For N76E003 MCU Supports 3.3V/5V 2.54-5P Interface Program Download & Online Debugger With USB Cable
Original price was: $8.50.$7.92Current price is: $7.92.
↓ 7%
WCH‑Link Emulator Download Debugger USB Type‑C Version Online Debugging Programmer For CH32 Series MCU Firmware Download
WCH‑Link Emulator Download Debugger USB Type‑C Version Online Debugging Programmer For CH32 Series MCU Firmware Download
Price :
$1.29 $1.30Price range: $1.29 through $1.30
- Information related to taxation
- Some question to contact us
- Shipping Information
Multifunctional WCH‑Link debugger with SWD download and TTL serial port, supports RISC‑V & ARM MCU, 5V/3.3V dual power output, transparent shell, USB‑A / Type‑C optional for embedded debugging.
Description
WCH‑Link Emulator Download Debugger
📌 Product Overview WCH‑Link is a multifunctional download and debugging emulator designed for WCH microcontrollers, which supports QinHeng RISC‑V and ARM core chips. This debugger integrates SWD download function and TTL serial port debugging function, equipped with transparent protective casing, and provides 5V / 3.3V dual power output for the target board. It has two versions of USB‑A and Type‑C interface, compact and portable, and supports firmware upgrade. It is widely used in program downloading, online debugging and serial log viewing of MCU development projects. ✨ Core Features- Compatible with QinHeng RISC‑V and ARM core microcontrollers.
- Support dual power supply output: 5V and 3.3V for target board power supply.
- Two optional USB versions: USB‑A interface and Type‑C interface.
- Integrate SWD download interface and TTL serial port, serial port supports multiple baud rates for debugging message output.
- Clear transparent protective shell, small size, anti‑drop protection for internal circuit board.
- Support offline firmware upgrade, just short the ISP solder points to complete USB upgrade operation.
- 5V: Power supply pin for target MCU 5V
- 3V3: Power supply pin for target MCU 3.3V
- GND: Common ground connection with target board
- SWCLK: SWD clock pin for downloading and debugging
- SWDIO: SWD data pin for downloading and debugging
- RX: UART receive pin, connect to target board UART‑TX
- TX: UART transmit pin, connect to target board UART‑RX
- Confirm the power voltage of the target chip before power output to avoid chip burnout.
- Correctly match the TX and RX pins between debugger and the main control board.
- Short the ISP pads only when upgrading the device firmware.
Downloads
PDF File
WCH‑Link Emulator Download Debugger USB Type‑C Version Online Debugging Programmer For CH32 Series MCU Firmware Download
Price :
$1.29 $1.30Price range: $1.29 through $1.30
- Information related to taxation
- Some question to contact us
- Shipping Information
Multifunctional WCH‑Link debugger with SWD download and TTL serial port, supports RISC‑V & ARM MCU, 5V/3.3V dual power output, transparent shell, USB‑A / Type‑C optional for embedded debugging.
Description
WCH‑Link Emulator Download Debugger
📌 Product Overview WCH‑Link is a multifunctional download and debugging emulator designed for WCH microcontrollers, which supports QinHeng RISC‑V and ARM core chips. This debugger integrates SWD download function and TTL serial port debugging function, equipped with transparent protective casing, and provides 5V / 3.3V dual power output for the target board. It has two versions of USB‑A and Type‑C interface, compact and portable, and supports firmware upgrade. It is widely used in program downloading, online debugging and serial log viewing of MCU development projects. ✨ Core Features- Compatible with QinHeng RISC‑V and ARM core microcontrollers.
- Support dual power supply output: 5V and 3.3V for target board power supply.
- Two optional USB versions: USB‑A interface and Type‑C interface.
- Integrate SWD download interface and TTL serial port, serial port supports multiple baud rates for debugging message output.
- Clear transparent protective shell, small size, anti‑drop protection for internal circuit board.
- Support offline firmware upgrade, just short the ISP solder points to complete USB upgrade operation.
- 5V: Power supply pin for target MCU 5V
- 3V3: Power supply pin for target MCU 3.3V
- GND: Common ground connection with target board
- SWCLK: SWD clock pin for downloading and debugging
- SWDIO: SWD data pin for downloading and debugging
- RX: UART receive pin, connect to target board UART‑TX
- TX: UART transmit pin, connect to target board UART‑RX
- Confirm the power voltage of the target chip before power output to avoid chip burnout.
- Correctly match the TX and RX pins between debugger and the main control board.
- Short the ISP pads only when upgrading the device firmware.
Downloads
PDF File
Related Products
↓ 10%
CH340C SU‑03T AI Offline Voice Downloader USB To Serial 3.3V TTL Burning Cable Firmware Programming Tool For Voice Module
Original price was: $1.60.$1.44Current price is: $1.44.
↓ 16%
USB Blaster Downloader Cable Stable Version FPGA CPLD JTAG Programmer Debugger Download Wire For Altera Development Board
Original price was: $1.50.$1.26Current price is: $1.26.
-
Powerful Suction Solder Sucker CS305 (Improved Version)
$0.86 -
WT32-ETH01 Serial to Ethernet Module (ESP32 Based)
$4.50 $9.63Price range: $4.50 through $9.63 -
Pro Mini MEGA328P 5V/16M Improved Version Microcontroller Board (Arduino Compatible)
$1.45 -
Sale!
LM2596S DC-DC Buck Power Supply Module 3-40V Input 1.5-35V Adjustable Output Step Down Converter With Power Indicator For Arduino Electronic Project
$0.32 $0.36Price range: $0.32 through $0.36 -
LIVE Scanner V3 1D 2D Barcode QR Code Scanning Module USB UART
$12.68 -
NiceMCU-C5 ESP32-C5 2.8 Inch IPS Display Development Board
$11.92 -
GY-49 MAX44009 Ambient Light Sensor Module I2C 3V-5V
$7.38 -
FT232RL MWC USB to TTL Serial Debugger Module 3.3V/5V
$1.02 -
Sale!
TTGO ESP32 WiFi Bluetooth Development Board 1.14 Inch Color LCD Display Type-C Low Power Module With Pin Header And Power Cable For Arduino IoT DIY Electronic Project
Original price was: $11.00.$9.94Current price is: $9.94. -
Sale!
28BYJ-48 5V Stepper Motor With ULN2003 Driver Module 4 Phase Reduction Step Motor Kit For Arduino Smart Home And Robot DIY Projects
$0.25 $0.77Price range: $0.25 through $0.77 -
Sale!
TMC5160TPro Stepper Motor Driver Module External Power MOSFET Ultra Silent Anti-Shake Driver For 3D Printer CNC Stepper Motor Control Project
$15.00 $16.50Price range: $15.00 through $16.50 -
Sale!
Nu-Link Downloader Emulator For N76E003 MCU Supports 3.3V/5V 2.54-5P Interface Program Download & Online Debugger With USB Cable
Original price was: $8.50.$7.92Current price is: $7.92. -
Sale!
FT232H High Speed Multifunction USB Communication Module USB To SPI/I2C/UART Serial Adapter Board For MCU Program Download And Data Transmission
$5.50 $6.97Price range: $5.50 through $6.97 -
Sale!
VEML6035 Ambient Light Sensor Module 16-bit High Sensitivity I2C Interface Brightness Detection Board For Arduino Raspberry Pi Light Intensity Measurement
Original price was: $2.00.$1.84Current price is: $1.84. -
Sale!
PN532 NFC RFID V3 Module 13.56MHz I2C SPI UART Card Reader Writer With IC Card & Key Fob Tag For Arduino Raspberry Pi IoT Access Control Project
$1.65 $3.36Price range: $1.65 through $3.36 -
Sale!
IP5356 Digital Display Fast Charging Power Bank Module 5V 3A Lithium Battery Charge Discharge Board Type-C Dual USB Power Management Module
Original price was: $1.50.$1.38Current price is: $1.38.
